3. TCP/IP Setting Configuration

 

In this section, you are assumed have correctly identified the IP address for the OnlineLearning System Server. Therefore, you must produce a manual on how to configure the IP address on the server. You can use any operating system to demonstrate this task. The explanation should be supported with the screenshot and appropriate explanation.

Steps to do TCP/IP Configuration:

1.   Search "Control Panel" at the "Type here to search" bar at the bottom of the computer.

2. Click "Network and Internet". 

3. Click "Network and Sharing Center". 

Another ways to open the configuration setting:

1)  Click symbol windows and then click symbol settings.

2) Click "Network & Internet".

3) At this menu, it have two ways that can start the configuration either click "Change adapter options" or click "Network and Sharing Center".

 

4) If click the "Change adapter options", the output interface will be like below figure.

5) If click "Network and Sharing Center", output interface will be like below figure.

6) Then, click on the connection name. It will show the interface like below. On this interface, click on properties to see the wi-fi connection properties more details.

7) Once the below Wi-fi properties appear, select Internet Protocol Version 4 (TCP/IPv4) and then click on properties. This will show the IP address that we use for the Wi-fi connection. 

8) Select the use IP Address. The use IP Address, Subnet Mask, Default gateway, Preferred DNS server are fill with the use IP address for the OnlineLearning. Then click, OK.

9) To display the used IP Address for the network, we need to use command prompt. 

• Open Command Prompt
• Type ipconfig
• The output will be shown as below